Damage-free dry transfer method using stress engineering for high-performance flexible two- and three-dimensional electronics. NATURE MATERIALS, NATURE PUBLISHING GROUP, 2024-10

권 23 호 10 페이지 1411 ~ 1420

Lubricant-Added Conductive Composite for Direct Writing of a Stretchable Electrode. ACS APPLIED MATERIALS & INTERFACES, AMER CHEMICAL SOC, 2019-12

권 11 호 51 페이지 48459 ~ 48465

Fabrication of long tubular parts made of tungsten-heavy alloys by inductive bonding of multiple tubes. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, ELSEVIER SCI LTD, 2019-12

권 85 페이지 1 ~ 11

Development of a roll-to-roll hot imprinting process for superhydrophobic polytetrafluoroethylene surfaces. JOURNAL OF MICROMECHANICS AND MICROENGINEERING, IOP PUBLISHING LTD, 2019-11

권 29 호 11 페이지 115003 ~ 115003

Constitutive Modeling of Asymmetric Hardening Behavior of Transformation-Induced Plasticity Steels. INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, KOREAN SOC AUTOMOTIVE ENGINEERS, 2019-11

권 20 페이지 19 ~ 30

Electromagnetic expansion joining between tubular and flat sheet component. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, ELSEVIER SCIENCE SA, 2019-11

권 273 페이지 116246 ~ 116246

고온 임프린팅을 통한 알루미늄합금 표면의 마이크로/나노 구조 성형 기술. 소성가공, 한국소성가공학회, 2019-10

권 28 호 5 페이지 239 ~ 246

Forced Circulation of Nitrogen Gas for Accelerated and Eco-Friendly Cooling of Metallic Parts. APPLIED SCIENCES-BASEL, MDPI AG, 2019-09

권 9 호 18 페이지 1 ~ 14

Characterization of the Mechanical Properties of a High-Strength Laminated Vibration Damping Steel Sheet and Their Application to Formability Prediction. METALS AND MATERIALS INTERNATIONAL, KOREAN INST METALS MATERIALS(대한금속.재료학회), 2019-09

권 25 호 5 페이지 1326 ~ 1340

Piezoresistive behaviour of additively manufactured multi-walled carbon nanotube/thermoplastic polyurethane nanocomposites. MATERIALS, MDPI, 2019-08

권 12 호 16 페이지 2613 ~ 2613

Feasibility study on application of hot forming quenching to patchwork blanks using two-stage refilled friction stir spot welding. JOURNAL OF MANUFACTURING PROCESSES, ELSEVIER SCI LTD, 2019-05

권 41 페이지 66 ~ 73

Stretchable conductive nanocomposite based on alginate hydrogel and silver nanowires for wearable electronics. APL MATERIALS, AIP, 2019-03

권 7 호 3 페이지 031502 ~ 031502

목재 물성 측정 및 변형 예측 모델 개발. 소성가공, 한국소성가공학회, 2018-12

권 27 호 6 페이지 363 ~ 369

블랭킹 공정을 이용한 STS/Al 클래드 판재의계면 접합력 측정에 관한 연구. 소성가공, 한국소성가공학회, 2018-10

권 27 호 5 페이지 267 ~ 275

Effect of Constitutive Equations on Springback Prediction Accuracy in the TRIP1180 Cold Stamping. METALS, MDPI AG, 2018-01

권 8 호 1 페이지 1 ~ 17

TRIP강의 비대칭 거동과 스프링백. 소성가공, 한국소성가공학회, 2017-12

권 26 호 6 페이지 333 ~ 340

Stretchable Electrode Based on Laterally Combed Carbon Nanotubes for Wearable Energy Harvesting and Storage Devices. ADVANCED FUNCTIONAL MATERIALS, WILEY-V C H VERLAG GMBH, 2017-12

권 27 호 48 페이지 1704353(1) ~ 1704353(7)

Anisotropic hardening behaviour and springback of advanced high-strength steels. METALS, MDPI AG, 2017-11

권 7 호 11 페이지 480 ~ 480

DEVELOPMENT OF THE HANSEL-SPITTEL CONSTITUTIVE MODEL GAZED FROM A PROBABILISTIC PERSPECTIVE. JOURNAL OF THE KOREAN SOCIETY FOR INDUSTRIAL AND APPLIED MATHEMATICS, 한국산업응용수학회(구-한국산업정보응용수학회), 2017-09

권 21 호 3 페이지 155 ~ 165

Crystal plasticity finite element analysis of ferritic stainless steel for sheet formability prediction. INTERNATIONAL JOURNAL OF PLASTICITY, PERGAMON-ELSEVIER SCIENCE LTD, 2017-06

권 93 호 Special SI 페이지 26 ~ 45

Investigation of plastic strain rate under strain path changes in dual-phase steel using microstructure-based modeling. INTERNATIONAL JOURNAL OF PLASTICITY, PERGAMON-ELSEVIER SCIENCE LTD, 2017-06

권 93 호 Special SI 페이지 89 ~ 111

열원 입력과 비드 생성 방법이 원통형 다층 금속 용접 과정의 유한요소해석에 미치는 영향. 대한기계학회논문집 A, 대한기계학회, 2017-06

권 41 호 6 페이지 455 ~ 467

전변형과 굽힘을 이용한 초고강도 철강 판재의 반복 거동 측정. 소성가공, 한국소성가공학회, 2017-02

권 26 호 1 페이지 41 ~ 47

Wearable Force Touch Sensor Array Using a Flexible and Transparent Electrode. ADVANCED FUNCTIONAL MATERIALS, WILEY-V C H VERLAG GMBH, 2017-02

권 27 호 6 페이지 1605286 ~ 1605286

Multiscale Analysis of Open-Cell Aluminum Foam for Impact Energy Absorption. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, ASM INTERNATIONAL, 2016-09

권 25 호 9 페이지 3977 ~ 3984

항복함수 및 경화모델에 따른 DP980 강판의 스프링백 예측. 소성가공, 한국소성가공학회, 2016-06

권 25 호 3 페이지 189 ~ 194

Practical Determination of Friction Coefficient of Al 3003 for Forming of Backward Extruded Part Using Simple Tip Test and Inverse Finite Element Analysis. METALS AND MATERIALS INTERNATIONAL, KOREAN INST METALS MATERIALS(대한금속.재료학회), 2016-05

권 22 호 3 페이지 356 ~ 363

Thermally Controlled, Patterned Graphene Transfer Printing for Transparent and Wearable Electronic/Optoelectronic System. ADVANCED FUNCTIONAL MATERIALS, WILEY-V C H VERLAG GMBH, 2015-12

권 25 호 46 페이지 7109 ~ 7118

Modeling of forming limit for multilayer sheets based on strain-rate potentials. INTERNATIONAL JOURNAL OF PLASTICITY, PERGAMON-ELSEVIER SCIENCE LTD, 2015-12

권 75 호 Special SI 페이지 63 ~ 99

Cyclic behavior of AZ31B Mg: Experiments and non-isothermal forming simulations. INTERNATIONAL JOURNAL OF PLASTICITY, PERGAMON-ELSEVIER SCIENCE LTD, 2015-12

권 75 호 Special SI 페이지 39 ~ 62

Properties controlling the bend-assisted fracture of AHSS. INTERNATIONAL JOURNAL OF PLASTICITY, PERGAMON-ELSEVIER SCIENCE LTD, 2015-12

권 75 호 Special SI 페이지 100 ~ 120

Thermo-mechanical constitutive equations for glass and its numerical formulation for warpage analysis of silicon-glass multilayered structure. INTERNATIONAL JOURNAL OF PLASTICITY, PERGAMON-ELSEVIER SCIENCE LTD, 2015-12

권 75 호 Special SI 페이지 204 ~ 225

3차원 미세조직에 기반한 잔류응력 하의이상 조직강의 소성변형률비 예측. 소성가공, 한국소성가공학회, 2015-12

권 24 호 6 페이지 395 ~ 399

AA1070 알루미늄 합금의 사각형상 충격압출 성형에 미치는 공정 조건의 영향. 소성가공, 한국소성가공학회, 2015-10

권 24 호 5 페이지 323 ~ 331

미세조직이 고려된 이상 조직강의 유한 요소 해석. 소성가공, 한국소성가공학회, 2015-06

권 24 호 3 페이지 194 ~ 198

Stretchable Heater Using Ligand-Exchanged Silver Nanowire Nanocomposite for Wearable Articular Thermotherapy. ACS NANO, AMER CHEMICAL SOC, 2015-06

권 9 호 6 페이지 6626 ~ 6633

Wearable red-green-blue quantum dot light-emitting diode array using high-resolution intaglio transfer printing. NATURE COMMUNICATIONS, NATURE PUBLISHING GROUP, 2015-05

권 6 페이지 7149 ~ 7149

Oxide Nanomembrane Hybrids with Enhanced Mechano- and Thermo-Sensitivity for Semitransparent Epidermal Electronics. ADVANCED HEALTHCARE MATERIALS, WILEY-BLACKWELL, 2015-05

권 4 페이지 992 ~ 997

Experimental and numerical analysis of a rectangular helical coil actuator for electromagnetic bulging. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, SPRINGER-VERLAG LONDON LTD, 2015-05

권 78 호 5-8 페이지 825 ~ 839

Stretchable Carbon Nanotube Charge-Trap Floating-Gate Memory and Logic Devices for Wearable Electronics. ACS NANO, AMER CHEMICAL SOC, 2015-04

권 9 페이지 5585 ~ 5593

Experimental study on forming behavior of high-strength steel sheets under electromagnetic pressure. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, PROFESSIONAL ENGINEERING PUBLISHING LTD, 2015-04

권 229 페이지 670 ~ 681

Recent developments in hydroforming technology. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, PROFESSIONAL ENGINEERING PUBLISHING LTD, 2015-04

권 229 페이지 572 ~ 596

Transparent and stretchable interactive human machine interface based on patterned graphene heterostructures. ADVANCED FUNCTIONAL MATERIALS, WILEY-V C H VERLAG GMBH, 2015-01

권 25 호 3 페이지 375 ~ 383

A pragmatic approach to accommodate in-plane anisotropy in forming limit diagrams. MECHANICS RESEARCH COMMUNICATIONS, PERGAMON-ELSEVIER SCIENCE LTD, 2014-12

권 62 페이지 5 ~ 17

Stretchable silicon nanoribbon electronics for skin prosthesis. NATURE COMMUNICATIONS, NATURE PUBLISHING GROUP, 2014-12

권 5 페이지 1 ~ 11

Measurement of the Bauschinger behavior of sheet metals by three-point bending springback test with pre-strained strips. INTERNATIONAL JOURNAL OF PLASTICITY, PERGAMON-ELSEVIER SCIENCE LTD, 2014-08

권 59 페이지 84 ~ 107

Reverse-Micelle-Induced Porous Pressure-Sensitive Rubber for Wearable Human-Machine Interfaces. ADVANCED MATERIALS, WILEY-V C H VERLAG GMBH, 2014-07

권 26 호 28 페이지 4825 ~ 4825

Meso-Scopic Analysis of Strain Path Change Effect on the Hardening Behavior of Dual-Phase Steel. STEEL RESEARCH INTERNATIONAL, VERLAG STAHLEISEN MBH, 2014-06

권 85 페이지 1047 ~ 1057

Mechanical Behavior of AZ31B Mg Alloy Sheets under Monotonic and Cyclic Loadings at Room and Moderately Elevated Temperatures. MATERIALS, MDPI, 2014-02

권 7 페이지 1271 ~ 1295

Evaluating the significance of hardening behavior and unloading modulus under strain reversal in sheet springback prediction. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, PERGAMON-ELSEVIER SCIENCE LTD, 2013-12

권 77 페이지 194 ~ 204

A practical constitutive model for AZ31B Mg alloy sheets with unusual stress-strain response. FINITE ELEMENTS IN ANALYSIS AND DESIGN, ELSEVIER SCIENCE BV, 2013-11

권 76 페이지 39 ~ 49

A temperature-dependent elasto-plastic constitutive model for magnesium alloy AZ31 sheets. INTERNATIONAL JOURNAL OF PLASTICITY, PERGAMON-ELSEVIER SCIENCE LTD, 2013-11

권 50 페이지 66 ~ 93

Anisotropic Hardening of Sheet Metals at Elevated Temperature: Tension-Compressions Test Development and Validation. EXPERIMENTAL MECHANICS, SAGE PUBLICATIONS LTD, 2013-07

권 53 페이지 1039 ~ 1055

Numerical procedures for predicting localization in sheet metals using crystal plasticity. COMPUTATIONAL MATERIALS SCIENCE, ELSEVIER SCIENCE BV, 2013-05

권 72 페이지 107 ~ 115

Strain rate dependent tensile behavior of advanced high strength steels: Experiment and constitutive modeling. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, ELSEVIER SCIENCE SA, 2013-01

권 559 페이지 222 ~ 231

Analysis of annealing processes of glass sheets based on structural relaxation model. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, PERGAMON-ELSEVIER SCIENCE LTD, 2013-01

권 66 페이지 249 ~ 259

Stress integration schemes for novel homogeneous anisotropic hardening model. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, ELSEVIER SCIENCE SA, 2012-11

권 247-2 호 0 페이지 73 ~ 92

A sheet tension/compression test for elevated temperature. INTERNATIONAL JOURNAL OF PLASTICITY, PERGAMON-ELSEVIER SCIENCE LTD, 2012-11

권 38 페이지 27 ~ 46

The Draw-Bend Fracture Test and Its Application to Dual-Phase and Transformation Induced Plasticity Steels. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, ASME-AMER SOC MECHANICAL ENG, 2012-10

권 134 페이지 041015......... ~ 041015..........

Experimental Investigation on Biaxial Formability of Tailored High Strength Steel at Elevated Temperature. STEEL RESEARCH INTERNATIONAL, VERLAG STAHLEISEN MBH, 2012-09

호 Special SI 페이지 879 ~ 882

Comparison of Forming Limits Predicted Using Phenomenological and C Plasticity Models. STEEL RESEARCH INTERNATIONAL, VERLAG STAHLEISEN MBH, 2012-09

호 Special SI 페이지 1123 ~ 1126

A numerical investigation of the hole expansion test. Advanced Science Letters, AMER SCIENTIFIC PUBLISHERS, 2012-07

권 14 호 1 페이지 218 ~ 221

Prediction of nonlinear kinematic hardening parameters for DP steels by crystal plasticity-based micromechanical analysis. Advanced Science Letters, AMER SCIENTIFIC PUBLISHERS, 2012-06

권 13 호 0 페이지 224 ~ 227

Mechanical property degradation of laser welded boron steel sheet in hot press forming. Advanced Science Letters, AMER SCIENTIFIC PUBLISHERS, 2012-06

권 13 호 0 페이지 447 ~ 450

Crystal plasticity approach for predicting the Bauschinger effect in dual-phase steels. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, ELSEVIER SCIENCE SA, 2012-03

권 539 호 0 페이지 259 ~ 270

Time-dependent springback of advanced high strength steels. INTERNATIONAL JOURNAL OF PLASTICITY, PERGAMON-ELSEVIER SCIENCE LTD, 2012-02

권 29 페이지 42 ~ 59

알루미늄 폼이 충전된 충돌부재의 충격흡수 성능. 소성가공, 한국소성가공학회, 2011-12

권 20 호 8 페이지 555 ~ 561

마이크로 X-ray CT를 활용한 알루미늄 개방형 폼의 형상 및 압축 거동 분석. 소성가공, 한국소성가공학회, 2011-11

권 20 호 7 페이지 518 ~ 523

The shear fracture of dual-phase steel. INTERNATIONAL JOURNAL OF PLASTICITY, PERGAMON-ELSEVIER SCIENCE LTD, 2011-10

권 27 호 10 페이지 1658 ~ 1676

Simulation of polycrystal deformation with grain and grain boundary effects. INTERNATIONAL JOURNAL OF PLASTICITY, PERGAMON-ELSEVIER SCIENCE LTD, 2011-09

권 27 호 9 페이지 1328 ~ 1354

레이저 용접된 보론강판의 고온 인장 특성 평가. 소성가공, 한국소성가공학회, 2011-08

권 20 호 5 페이지 362 ~ 368

평면 응력 조건에서 정의된 비이차 비등방 변형률 속도 포텐셜. 소성가공, 한국소성가공학회, 2011-08

권 20 호 5 페이지 369 ~ 376

Micromechanics-Based Strain Hardening Model in Consideration of Dislocation-Precipitate Interactions. METALS AND MATERIALS INTERNATIONAL, KOREAN INST METALS MATERIALS(대한금속.재료학회), 2011-04

권 17 호 2 페이지 291 ~ 300

Experimental investigation into effect of annealing treatment on springback of magnesium alloy sheets. MATERIALS RESEARCH INNOVATIONS, MATRICE TECHNOLOGY LIMITED, 2011-02

권 15 페이지 183 ~ 186

A plastic constitutive equation incorporating strain, strain-rate, and temperature. INTERNATIONAL JOURNAL OF PLASTICITY, PERGAMON-ELSEVIER SCIENCE LTD, 2010-12

권 26 페이지 1746 ~ 1771

Hole-expansion formability of dual-phase steels using representative volume element approach with boundary-smoothing technique. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, ELSEVIER SCIENCE SA, 2010-10

권 527 호 27-28 페이지 7353 ~ 7363

Simple Analytical Model of Shear Failure. STEEL RESEARCH INTERNATIONAL, VERLAG STAHLEISEN MBH, 2010-09

권 81 호 9 페이지 1360 ~ 1363

Improved contact procedure for implicit finite element sheet forming simulation. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, JOHN WILEY & SONS LTD, 2010-09

권 83 호 13 페이지 1759 ~ 1779

An efficient constitutive model for room-temperature, low-rate plasticity of annealed Mg AZ31B sheet. INTERNATIONAL JOURNAL OF PLASTICITY, PERGAMON-ELSEVIER SCIENCE LTD, 2010-06

권 26 호 6 페이지 820 ~ 858

FINITE ELEMENT AND ANALYTICAL STUDY OF PLANE STRAIN DRAW-BEND FAILURE OF ADVANCED HIGH STRENGTH STEELS. INTERNATIONAL JOURNAL OF MATERIAL FORMING, SPRINGER FRANCE, 2010-04

권 3 페이지 187 ~ 190

Numerical simulation of friction stir spot welding process for aluminum alloys. METALS AND MATERIALS INTERNATIONAL, KOREAN INST METALS MATERIALS(대한금속.재료학회), 2010-04

권 16 페이지 323 ~ 332

Numerical simulation of friction stir butt welding process for AA5083-H18 sheets. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, GAUTHIER-VILLARS/EDITIONS ELSEVIER, 2010-03

권 29 페이지 204 ~ 215

A boundary smoothing algorithm for image-based modeling and its application to micromechanical analysis of multi-phase materials. COMPUTATIONAL MATERIALS SCIENCE, ELSEVIER SCIENCE BV, 2010-01

권 47 페이지 785 ~ 795

Multi-scale solid oxide fuel cell materials modeling. COMPUTATIONAL MECHANICS, SPRINGER-VERLAG, 2009-10

권 44 호 5 페이지 683 ~ 703

Formability of Advanced High Strength Steels. INTERNATIONAL JOURNAL OF MATERIAL FORMING, SPRINGER FRANCE, 2009-08

권 2 페이지 359 ~ 362

Reverse effect of tensile force on sidewall curl for materials with tensile/compressive strength difference. METALS AND MATERIALS INTERNATIONAL, KOREAN INST METALS MATERIALS(대한금속.재료학회), 2009-06

권 15 페이지 353 ~ 363

Analytical springback model for lightweight hexagonal close-packed sheet metal. INTERNATIONAL JOURNAL OF PLASTICITY, PERGAMON-ELSEVIER SCIENCE LTD, 2009-03

권 25 페이지 399 ~ 419

Themo-mechanical and microstructural modeling of friction stir welding of 6111-T4 aluminum alloys. METALS AND MATERIALS INTERNATIONAL, KOREAN INST METALS MATERIALS(대한금속.재료학회), 2009-02

권 15 호 1 페이지 125 ~ 132

Characterization of mechanical properties by indentation tests and FE analysis - validation by application to a weld zone of DP590 steel. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, PERGAMON-ELSEVIER SCIENCE LTD, 2009-01

권 46 호 2 페이지 344 ~ 363

An elasto-plastic constitutive model with plastic strain rate potentials for anisotropic cubic metals. INTERNATIONAL JOURNAL OF PLASTICITY, PERGAMON-ELSEVIER SCIENCE LTD, 2008-12

권 24 호 12 페이지 2298 ~ 2334

Determination of wrinkling criteria for an incompressible polymer membrane by non-linear elastic finite element method. POLYMERS & POLYMER COMPOSITES, RAPRA TECHNOLOGY LTD, 2008-06

권 16 호 4 페이지 225 ~ 232

Development of nonlinear constitutive laws for anisotropic and asymmetric fiber reinforced composites. POLYMER COMPOSITES, JOHN WILEY & SONS INC, 2008-02

권 29 페이지 216 ~ 228

Micromechanical modeling of fiber reinforced composites based on elastoplasticity and its application for 3D braided glass/Kevlar composites. POLYMER COMPOSITES, JOHN WILEY & SONS INC, 2007-12

권 28 페이지 722 ~ 732

Elasto-plastic analysis of the impact performance of woven fabric composites. POLYMERS & POLYMER COMPOSITES, RAPRA TECHNOLOGY LTD, 2007-06

권 15 호 4 페이지 281 ~ 290

Residual stress analysis with improved numerical methods for tempered plate glasses based on structural relaxation model. METALS AND MATERIALS INTERNATIONAL, KOREAN INST METALS MATERIALS(대한금속.재료학회), 2007-02

권 13 페이지 67 ~ 75

Numerical implementation of modified Coulomb-Mohr yield criterion for anisotropic and asymmetric materials. FIBERS AND POLYMERS, KOREAN FIBER SOCIETY, 2006-09

권 7 페이지 276 ~ 285

An alternative approach to analysis of plane-strain pure bending at large strains. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, PROFESSIONAL ENGINEERING PUBLISHING LTD, 2006-07

권 41 페이지 397 ~ 410

Anisotropic-asymmetric yield criterion and anisotropic hardening law for composite materials: Theory and formulations. FIBERS AND POLYMERS, KOREAN FIBER SOCIETY, 2006-03

권 7 호 1 페이지 42 ~ 50

3차원 원형 브레이드 유리 섬유 강화 복합 재료를 이용한 3점 굽힘 실험의 탄소성 해석. 한국섬유공학회지, 한국섬유공학회, 2005-10

권 42 호 5 페이지 336 ~ 340

Constitutive equations based on cell modeling method for 3D circular braided glass fiber reinforced composites. FIBERS AND POLYMERS, 한국섬유공학회(KOREAN FIBER SOCIETY), 2003-06

권 4 페이지 77 ~ 83